I wondered if I could switch the SATA port from the blue (SATA 3.0Gb/s) to white(SATA 6.0Gb/s) port since my hackintosh has been upgraded to LION so today I did just that and bang I’m on SATA III without any issue. But the weird part is I don’t feel any speed difference. With SATA III
1 | time dd if=/dev/zero bs=1024k of=tstfile count=1024 |
4 | 1073741824 bytes transferred in 8.016426 secs (133942713 bytes/sec) |
Divide 1024MB by 8 seconds and I got a write speed to 128MB/s on SATA III.
To satisfy my own curiosity, I plugged the hd (a 2TB Hitachi SATA III) back to the SATA II port and ran another write test. And the result turned out to be
1 | time dd if=/dev/zero bs=1024k of=tstfile1 count=1024 |
4 | 1073741824 bytes transferred in 8.283360 secs (129626362 bytes/sec) |
Which yields a 123MB/s, it’s slower than SATA III but not by much.
Thanx to ricochen.wordpress.com
Publicado en fecha: martes, agosto 09, 2011.
Etiqueta: lion.
Usted puede tambien seguir nuestras noticias por RSS 2.0.
.jpg)
.jpg)
.jpg)