.jpg){kind=small}
.JPG)
.jpg)
Publicado el martes, 25 de octubre de 2011
www.TuTilapia.com
List of Motherboards tested for iATKOS L1 (10.7.2)
Motherboards
[edit]Abit
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| Yes | Yes | ||||
[edit]Asrock
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit workingwithpatches | |
|---|---|---|---|---|---|
| G31M-S R2.0 | G31 | Sleep does not work. Everything else works fine. System Configuration:
| MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial here |  | |
| H61M-VS | Intel H61 | Sleep, Onboard Audio and Integrated Graphics not tested. Everything else works fine. System Configuration:
| MyHack 2.0 RC4.1, AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext | | |
| asrock-wolfdale 1333-d667 R2.0[1] | ICH7 | System Configuration:
| Patches
| | |
[edit]Asus
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working | |
|---|---|---|---|---|---|
| P8P67 LE | P67 | 100% Working | Just bootloader (Chimera) and audio/LAN kexts. | | |
| P5K Premium/WiFi-AP | P35/ICH9R | System Configuration:
Components Status:
| Patches
Useful Tools | | |
| P5KPL-AM/PS | Intel (R) G31 | Hardware:
Notes
| Kexts
| | |
| P5KPL-AM/SE | Intel (R) G31 | Hardware:
Install Method: 1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler (http://www.hmbt.org/forum) 2. BaseSystem with Packages on a external Driver or Pendrive 3. Install kexts on http://www.appunix.com.br/howto/mac-os/p5kpl-am-se-hackintosh-mac-os-x-snow-leopard-lion-kexts-necessarias/ (Portuguese) 4. Very very very Easy 5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW 6. Thanks for HMBT (Hackintosh Brasilian Team, the bests) 7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration) | Kexts
| | |
| P5KPL-AM EPU | P35 + ICH9, BIOS 501 | Hardware:
Notes
Install Method:
| Patches
'
Useful Tools | | |
| Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive. | Kexts
| | |
| P8Z68 Deluxe | Intel (R) z68 | System Configuration:
Component Status:
Install Method: 1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with "GraphicsEnabler=Yes and npci=0x2000". (on external thumb drive couse of the efi boot) Sorry for my BAD english | Kexts
| | |
| P7H55D - M EVO | INTEL H55 | System Configuration:
Component Status:
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches. | Patches
VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install. | | |
| Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran "extra lion" to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update | Pathces
| | |
| P5KС | Intel (R) P35 | Hardware:
Notes
| Kexts
| | |
[edit]Foxconn
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working withpatches | |
|---|---|---|---|---|---|
| P35A | Intel P35/ICH9 |
|
| | |
[edit]Gigabyte
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working withpatches | |
|---|---|---|---|---|---|
| EP45-UD3L | Intel P45 ICH10 | Hardware:
Notes:
| Kexts
| | |
| X58A-UD7 | Intel X58A ICH10 | Hardware:
Notes:
| Kexts
| | |
| GA-G31M-ES2L rev 2.4 | Intel G31/ICH7 | System Configuration:
|
| | |
| GA-Z68X-UD3-B3 | Intel Z68/ICH10 | Hardware:
Notes:
| Kexts:
| | |
[edit]Intel
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| Yes | Yes | ||||
[edit]MSI
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit workingwith patches | |
|---|---|---|---|---|---|
| H55M-E33 | Intel H55 | System Configuration:
Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed. The Installer-partition was not fully bootable until I copied my SL-/Extra onto it. Afterwards Installation was possible and i did a fresh install. | Patches via Multibeast 4.0.3:
Sleep:
| Yes | Yes |
[edit]Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
Also, place chip and board manufacturer in their respective column.
[edit]PCI-E
[edit]AMD/ATI
| Model | Board-Manufacturer | Notes | QE | Output | Dual display | 32/64bit working | |
|---|---|---|---|---|---|---|---|
| 6870 | XFX | Native Support | | VGA/DVI/HDMI | | | |
| 6870 | Sapphire | Sapphire 11179-09-20G HD 6870 1GB GDDR5 Native Support | | VGA/DVI/HDMI | | | |
| HD6950 2048MB | XFX | Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow) | | DVI | Not Tested | | |
| HD5870 1024MB Vapor-X | Sapphire | OOB | | DVI | Not Tested | | |
| Radeon HD 4350 512MB DDR2 | HIS | Follow this tutorial | | DVI | | | |
| Radeon HD 4850 512MB | Sapphire | Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes | | DVI | | | |
| RADEON HD6850 1024MB DDR5 | Sapphire | OOB (to enable hdmi audio http://www.tonymacx86.com/viewtopic.php?f=162&t=32037) | | DVI/HDMI | ? | | |
[edit]NVIDIA
| Model | Board-Manufacturer | Notes | QE | Output | Dual display | 32/64bit | |
|---|---|---|---|---|---|---|---|
| 8400 GS 512MB DDR3 | Zotac | Works with GraphicsEnabler=y , see tutorial | | DVI/DVI/HDMI | Tested | Tested |  Not Tested Yet |
| 9600M GS 512MB | Works with GraphicsEnabler=yes npci=0x2000 | | HDMI | | | | |
| 8400 GS 256 or 512MB | PNY | Works with GraphicsEnabler=y | | DVI/DVI/mHDMI | | | |
| GeForce 210 512mb GDDR3 | ASUS | GraphicsEnabler=Yes npci=0x2000 | | VGA/DVI/HDMI | | | |
| GeForce EN210 SILENT/DI/512MD2(LP) | ASUS | GraphicsEnabler=Yes npci=0x2000 | | VGA/DVI/HDMI | | | |
| GeForce 9500GT | inno3d | 1 GB model with NVEnabler 64.kext | | VGA/DVI/HDMI | | | |
| GeForce GTX 460 1GB | Gainward | GraphicsEnabler=Yes npci=0x2000 | | DVI | Not Tested | | |
| GeForce GTX 460 SC 1GB | EVGA | GraphicsEnabler=Yes npci=0x2000 | | DVI/DVI/mHDMI | | | |
| GTX 560 ti 1GB | MSI | added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed this guide | | DVI/DVI/mHDMI | | | |
| GeForce 9800GT 1GB | ??? | G92 Enabler from iAtkos L1 | | VGA/DVI/HDMI | | | |
[edit]Network Cards
[edit]Wireless
Interface | Standard | Device | Manufacturer | Chipset | Notes | 32/64bit working withpatch | |
|---|---|---|---|---|---|---|---|
| PCI-e | Wireless-N 300MBps | DWA-556 | D-Link | Broadcom | Works OOB | | |
| USB | b/g/n | TEW-649UB | TRENDnet | Download 10.6 Installer from [2] | | | |
| PCI | 802.11G(108G) | DWL-G520 | D-Link | Atheros | patched IO80211Family.kext | | |
| PCI | Wireless-N 300MBps | TL-WN851N 32-bit PCI Omni Directional, 2 Detachable Antennas | TP-Link | Broadcom | Works OOB as native Airport Extreme card in ALL VERSIONS of OS X since 10.5... amazing! Look at it here on the manufacturer's websitehttp://bit.ly/o6ezP6 | | |
[edit]Wired (Ethernet)
| Interface | Standard | Device | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|---|
| PCI | 1000/100/10 | TP-3269 | TP-Link | Works OOB | | |
[edit]Sound Cards
| Interface | Hardware Name | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|
| USB | Sound Blaster X-Fi Go PRO USB Sound Card | Creative Labs | Plug'n'Play | | |
[edit]Other Accessories
| Type of Accessory | Item Description | Manufacturer | Notes | 32/64bit working withpatch | |
|---|---|---|---|---|---|
| Vantec UGT-ST420R | SATA expansion card (additional SATA connections). RAID capable | Vantec | Use SONNET TEMPO SATA E2P Driver for the card. Works like a charm. | | |
Nice work by wiki.osx86project.org
.jpg)
